Unbranded

Mains Twin Switch 2 Gang Plug + 2 X 2000 Ma Usb Charger Sockets Usb 2.0 3.0

  • Sale
  • Regular price £15.99


The Dual Power Switched Socket with Dual USB Outlet allows you to charge / power 2x USB devices and 2 other electrical items from one double wall plate. The USB charging sockets are compatible with items such as smart phones, tablets and other devices that require charging via a USB port. The USB charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm minimum deep wall box

Specifications

  • Working voltage: 13A, 250V
  • Working temperature -15 to 40 C
  • USB Output: 2A, 5V
  • UK 3 pin socket output: 13A, 250V

IMPORTANT Please see below information

Installations Instructions

  • Firstly, ensure you isolate the mains power supply and remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit.
  • Following the diagram over-leaf pass the cable through the entry holes and connect to the appropriate terminal.
  • If an Earth loop connection is required, use the additional earth terminal block located in the back box.
  • Re-connect the mains supply when the installation is correctly completed.
    • Before use we recommend that a socket test is carried out.
    • DO NOT MEGGER TEST – this will damage the USB charging circuit.
  • Working voltage: 13A, 250V
  • Working temperature -15 to 40 C
  • USB Output: 2A, 5V
  • UK 3 pin socket output: 13A, 250V
  • Fits any standard back box (minimum depth of 25mm)

Safety Information

  • We recommend using a competent professional person for installation.
  • Only suitable for indoor installations. Before use it is recommend that a socket test is carried out.
  • Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions.
  • For safe installation & connection ensure that the earth is connected.
  • Wire/wiring colours are in accordance with the current IET Wiring Regulations